Spring Cleaning Your Fishing Equipment
With winter exiting this side of the world and the spring season coming up, anglers are excitedly getting their equipment ready. Even if you have only sort of stepped into the zone of this sport, it’s important to remember a couple of things. While out on the water, it’s crucial to use the right equipment. You absolutely must use the right tools to catch fish.
And for getting your gear ready, a little help goes a long way. A simple list to remind you of all the things you’re going to need is something any angler would want for getting the ideal experience. This is like a much enjoyable version of spring cleaning the house -because you’ll be excited throughout the process for the sport you love so much. So read ahead and ensure that your gear is ready to give the optimum performance.
Rods and Reels
If rods and reels could afford to get exhausted during the fishing season -well, even then they would continue being in use. This is precisely why overlooking them is so unfair. You must keep an eye on this crucial part of your fishing gear. Proper care and maintenance is the first step on this list.
And imagine you don’t. That would translate into paying costly bills for the slightest breakdown in these components. Furthermore, you’ll lose out on your trophy fish -and who wants that nightmare to come true? This is a chance of a lifetime, and you cannot afford it because you didn’t know where to begin your spring cleaning.
Begin with a visual inspection of the rod itself, and make sure there aren’t any cracks or breaks visible. Also, check for any weak spots that could lead to poor performance or be the factor of complete failure. These are all critical aspects of the entire spring cleaning process. If you’re satisfied with this inspection, you can move to other things. However, in case you detect any damage, you’ll need to get some repair done. In case of repair cannot fix the damage, it’s better to replace the rod simply.
An additional part of your inspection must involve the rod guides. A simple trick of running a Q-Tip (or a cotton ball) around all the guides will be very telling. The cotton must not remain intact -if it does, your guide likely has a burr or a rough spot. This would lead to a frayed, broken line. To avoid all this hassle, replace any such suspect guides that come to your notice. This will give you a far more peaceful experience.
For sprucing up your cork handles all grimy now, sandpaper is a friendly bet. A high grit paper like 220 is a preferable pick for this job. You could also give a little time to those rod handles for the fishing season. Grit paper rubbed on a dirty and grimy cork on the rod does impressive work -and you get a rod that looks like it’s newly bought.
End the process with some soap and water. Move to washing the entire rod with a soft-sided sponge and remove any water spots or leftover dirt since last year. Clean it nicely for a rod that looks ready and shines for the pleasant experience you’ll have ahead.
It’s no brainer that reels need to be checked before you get to fishing. It’s a crucial part of the setup, and you must start this work with a visual inspection. Check out if any part is broken or loose, or even worn. Specifically, areas like spring, handle, washers, and the drag shouldn’t be overlooked at all. After you’ve inspected, move on to tightening all the mechanisms with a small screwdriver or key. You need to fix all the loose screws for the season.
The next step in checking the reels is lubrication. Ideally, you follow the manufacturer’s instructions to make the job smooth. While using lubricant in the reels, using the oil or grease in little amounts is better.
Strip the monofilament fishing line from your reel and replace it, unless it’s superlines or braids that you’re using. We’re advising to use a fresh line for the upcoming season since old ones tend to weaken over time. With a little soap and water, you can finish the reel off. With all this cleaning done, you can put it in your tackle box. And in case you’re keen on buying new stuff, then there are a lot of options for finding the best fishing reels online.
Talking of tackle boxes, how can we forget this essential part of fishing equipment? And okay, not every angler might be too keen on opening it, especially since it’s likely that you left it in a somewhat questionable state in the fall. But whatever it may be, you have to dump out everything lurking inside the box.
It’s better to liken tackle box cleaning with doing dishes. Take it to the kitchen or the laundry sink. Thoroughly clean it off the dirt with a good rinse. Use a dishwashing liquid for better results. Put the now washed tackle box on a towel and leave it aside to dry for a while. Only then put anything inside the box.
Moving on to the next step -direct all your attention to the lures and baits. Inspect each lure and confirm it isn’t cracked, worn, or has any signs of broken lips. Also, make sure there aren’t any bent or rusty hooks. Quite obviously, you’ll need to throw the lure into the garbage in case it has any cracks or missing parts. Replace the hooks if you find that they are dull, bent or rusted. Use sharp and durable replacements for your damaged hooks. It’s better to use high-quality products and avoid any loss of peace later.
If you use plastic baits, you’ll be required to pay a little attention to them. Do away with any bait which is ripped or worn. Torn and grimy storage bags must also be discarded. Since you’re already in the cleaning and replacing mode, get yourself zippered plastic sandwich bags. Store your plastics in there, since it is see-through and you can see what’s inside the bag with a cursory glance.
Off with the virgin lures
Okay, so many of us are guilty of not having used some lures and baits for years. We just stick to our tackle box because… well, it’s ours. But what we must realise is that it leads to only a waste of space and opportunity. Why don’t you get the best fishing lures for 2020 instead of the same old ones? If you don’t want to sell them, or are emotionally attached to them, give the lures to someone else who would adequately use and appreciate them.
With the tackle for your box all sorted, you can now put it inside the box. And move on to take an inventory. Pen down a list of missing lures, lures that need to be replaced, and do it quickly. Double-check everything -all the lures, hooks, weights, and the status of other parts. You’ll later be grateful you did this early on. It will save you from the horrifying trouble of finding vital tackles missing while you’re starting the season.
Below are some more tips, that will add to your spring cleaning experience.
- Make sure that you have a fully functioning battery in your electronic scale.
- Ensure your net/cradle is in perfect working condition and doesn’t have any holes or rips.
- Take a look at your pliers and hook removers. Use adequate lubricant on them. Replace them if you think they’re not worth the hassle anymore.
- See if your fish scent is alright and add to the collection, in case you’re short of supply.
- Ensure your fishing glasses are suitable for using and don’t have any breakage or cracks. Give them a good cleaning.
- Check if the battery in your electronic scale is ready to give the optimum performance. In case it isn’t, replace them.
- Since you’ve done spring cleaning and fishing season should be about enjoyment and pleasure, buy yourself a new hat along with other necessary equipment you’re replacing. You know, to set the mood right and get into the zone! And while you’re at it, check out some trolling motors for fishing as well.
Now that you’re done with the spring cleaning of your equipment, you’ll be saved an enormous amount of peace and time. You’ll be avoiding any mechanical breakdown this way, and there won’t be any trouble on the water that you could have easily avoided. Now you have all your gear sorted over this spring. You’ll now have a fun and productive fishing season, and you can catch the trophy fish you’ve been waiting for all this while.